Omega RD200 Bedienungsanleitung PDF herunterladen (Seite 91)

－８７－

13. REMOTE CONTACTS

13.1 Remote Contacts Function

This explanation is only for the remote contacts (option).

1 Remote Contacts

(1) The following functions are available with the contact

signals at remote contacts terminals (EX1 to 4). However,

the functions are limited due to four terminals (EX1 to 4)

provided. Moreover, some functions are automatically

allocated to a certain terminal Nos.

(2) Programming to allocate the functions to terminal Nos. is

necessary.

Functions Terminals Remarks

(1) Printing on/off and selection of three chart

speeds

2 terminals (EX1, EX2) Programming 3 speeds, See Section 13.3. (Note 1)

(2) Execution of message printing (No.1 to 5) 4 terminals (EX1 to EX4) Programming message, See Section 11.10. (Note 2)

(3) Execution of message printing (No.1 and 2) 2 terminals (EX1, EX2) Programming message, See Section 11.10. (Note 3)

(4) Execution of digital data printing Any 1 terminal

(5) Execution of list printing (list 1, 2, 3) Any 3 terminals

(6) Execution of operation record (No.A to D) Any 4 terminals Programming operation record, See Section 13.4.

(7) Reset of totallization Any 1 terminal Available in totalization (option)

(Note 1) Free terminals left are EX3 and EX4.

(Note 2) No free terminals are left.

(Note 3) Free terminals left are EX3 and EX4.

2 Functions and Terminal Contact Signals

Functions Contact signal at terminal

• Program 3 chart speeds first. See Section 13.3.

With COM

Printing on/off and selection

of 3 hart speeds

EX1 EX2

CS1 OFF OFF

CS2 ON OFF

Printing: On

CS3 OFF ON

Printing: Off ON ON

(1) Printing on/off and selection of

3 chart speeds

(Note) Program “Printing on/off” to on with a key operation in advance.

• Program messages first. See Section 11.10.

With COM

Messag

EX1 EX2 EX3 EX4*

No.1 OFF OFF OFF For tri

No.2 ON OFF OFF

No.3 OFF ON OFF

No.4 ON ON OFF

No.5 OFF OFF ON

(2) Execution of message printing

(No. 1 to 5)

* When the trigger signals is sent (for 1 sec. or more) after selecting the

message No., the printing of programmed message starts.

(Note) Program “Printing on/off” to on with a key operation in advance.

Execution of message printing with key operation is also available.

See Section 9.4.

Remote contacts terminals

ON: Short OFF: O

COMEX1

EX2

EX3

EX4

1 sec. or more

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 133 134

Kommentare zu diesen Handbüchern

Keine Kommentare

Omega RD200 Bedienungsanleitung Seite 91

Kommentare zu diesen Handbüchern