Omega CNI16 Bedienungsanleitung PDF herunterladen (Seite 20)

3.2.1 ID Number

SEE ID MENU SELECTION IN CONFIGURATION SECTION FOR

ENABLE/DISABLE OR CHANGE ID CODE.

If ID Code is Disabled or set as Default (0000) the menu will skip ID step

to Setpoint Menu.

If ID Code is set to Full Security Level and user attempts to enter the

Main Menu, they will be prompted for an ID Code.

If ID Code is set to Setpoint/ID Security Level and user attempts to enter

the Configuration Menu, they will be prompted for an ID Code.

ENTERING YOUR NON-DEFAULT FULL SECURITY ID NUMBER.

Press a 1) Display shows

Press d 2) Display advances to

____

Press b & c 3) Press

to increase digit 0-9. Press

to activate next digit

(flashing). Continue to use

and c to enter your 4-digit ID

code.

Press d 4) If the correct ID code is entered, the menu will advance to the

Setpoint 1 Menu, otherwise an error message

ERRo

will be

displayed and the instrument will return to the Run Mode.

To change ID Code, see ID Menu in the Configuration section.

ENTERING YOUR NON-DEFAULT SETPOINT/ID SECURITY ID NUMBER.

Press a 5) Display shows

SP1

Setpoint 1 Menu.

Press a 6) Display shows

SP2

Setpoint 2 Menu.

Press a 7) Display shows

ID Code Menu.

Press d 8) Display advances to

____

Press b & c 9) Use b and c to change your ID Code.

Press d 10) If correct ID Code is entered, the display will advance to the

INPT

Input Menu, otherwise the error message

ERRo

will be

displayed and the controller will return to the Run Mode.

To prevent unauthorized tampering with the setup parameters, the

instrument provides protection by requiring the user to enter the ID Code

before allowing access to subsequent menus. If the ID Code entered

does not match the ID Code stored, the controller responds with an error

message and access to subsequent menus will be denied.

Use numbers that are easy for you to remember. If the ID Code is

forgotten or lost, call customer service with your serial number to access

and reset the default to

0000

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 71 72

Kommentare zu diesen Handbüchern

Keine Kommentare

Omega CNI16 Bedienungsanleitung Seite 20

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Thermometer Omega CNI16