Omega CNI16 Bedienungsanleitung PDF herunterladen (Seite 25)

Input Type (Process)

ENTER INPUT TYPE MENU:

Press a 1) Press a, if necessary, until

CNFG

prompt appears.

Press d 2) Display advances to

INPT

Input Menu.

Press d 3) Display flashes

T.ç

RTD

PROC

(Thermocouple, RTD or

Process). If the displayed input type is

PROC

, press a to skip to

step 6 (

PROC

stops flashing).

PROCESS SUBMENU:

Press b 4) Scroll through the available selection to

PROC

(flashing).

Press d 5) Display shows

STRD

stored message momentarily and then

PROC

(not flashing).

Press d 6) Display flashes previous Process type selection. i.e.

0-10

(see below for Process types selection).

Press b 7) Scroll through the available Process types to the selection of

your choice.

Press d 8) Display shows

STRD

stored message and then advances to

RDG

Reading Configuration Menu.

Process Types: 100 mV 1 V 10 V 0 – 20 mA

Display:

0-0.1 0-1.0 0-10 0-20

For 4-20 mA Input select 0-20 mA then adjust the Input/Reading accordingly.

To adjust 4-20 mA input, see example under INPUT/READING submenu. The

factory preset value is 4-20 mA.

3.2.5 Reading Configuration

Figure 3.4 Flow Chart for Reading Configuration Menu

It is required that you put the controller in the Standby Mode for any

configuration change other than Set Points & Alarms.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 71 72

Kommentare zu diesen Handbüchern

Keine Kommentare

Omega CNI16 Bedienungsanleitung Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Thermometer Omega CNI16