Omega CNI16 Bedienungsanleitung PDF herunterladen (Seite 26)

ENTER READING CONFIGURATION MENU:

Press

1) Press

, if necessary, until

CNFG

prompt appears.

Press

2) Display advances to

INPT

Input Menu.

Press

3) Display advances to

RDG

Reading Configuration Menu.

Press

4) Display advances to

DEC

Decimal Point.

DECIMAL POINT SUBMENU:

Press

5) Display flashes previous selection for Decimal location.

Press

6) Scroll though the available selections and choose Decimal

location:

FFFF

FFF.F

(also

FF.FF

and

F.FFF

— if

PROC

Process type was selected in the Input Type Menu).

Press

7) Display shows

STRD

stored message momentarily and then

advances to

TEMP

Temperature Unit.

Decimal Point for Process Input Type is passive.

TEMPERATURE UNIT SUBMENU:

Press

8) Display flashes previous Temperature Unit selection.

Press

9) Scroll though the available selections to the Temperature Unit

of your choice:

°F

°C

Press

10) Display shows

STRD

stored message momentarily and then

advances to

FLTR

Filter Constant.

FILTER CONSTANT SUBMENU:

Press

11) Display flashes previous selection for Filter Constant.

Press

12) Scroll though the available selections:

0001

0002

0004

0008

0016

0032

0064

0128

Press

13) Display shows

STRD

stored message momentarily only, if

change was made, otherwise press

to advance to the next

menu.

If Process was selected in the Input Type Menu the display will

advance to

IN.RD

Input/Reading Submenu, otherwise the

display advances to the

ALR1

Alarm 1 Menu.

The Filter Constant Submenu allows the user to specify the

number of readings stored in the Digital Averaging Filter.

For PID control select filter value 0001-0004. A filter value of 2 is

approximately equal to 1 second RC low pass time constant.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 71 72

Kommentare zu diesen Handbüchern

Keine Kommentare

Omega CNI16 Bedienungsanleitung Seite 26

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Thermometer Omega CNI16